Tag: Knifty Knitter

Coming out for Spring

I know I have been very remiss in my blogging endeavours, but I have to plead illness.It’s been a very hard month+ for me and talking to people is one of the most difficult things at times so I’m afraid I have just been hibernating away. But today, perhaps because of the spring weather (oh how I wish it were going to last!) or perhaps because I saw mallard ducks in my back lawn (why I have no idea and sadly I didn’t have my camera with me) or because I have a lot of announcements, I have finally felt like talking to the world at large.

But before I say more about what has been going on, here are some piccies for your entertainment:

Scarf for Mom

Scarf for Mom -- Detail

That is a scarf that I made for my mother last December, didn’t photograph until February and am only managing to post about today. It was made using Trendsetter Yarns Blossom using the Alternating rib stitch (5 rows each direction) on the Knifty Knitter long yellow loom. At least, this is how it looked before I washed it and sadly it is far more anaemic looking now 🙁 I’ll try to photograph it again to show the difference. t says he can’t tell and looking at the scrap yarn I can’t tell differences in the strands individually, but it just looks less fluffy 🙁 I’m very mad at myself for chancing a machine wash (delicate cycle) on a handwash yarn, even though I know my mom will only machine wash it anyway. I feel like I screwed up US$45 worth of lovely yarn and am really beating myself up about it 🙁

Beating myself up about things is sort of the theme lately, as that’s part of what happens in my depression cycle. The big D is what has been making life  miserable lately (mentally and physically as it increases pain levels). I’m not really going to talk about it much here as I know people don’t like hearing about that very much and so I’d rather save your illness attention spans for when I may need it in the future 😉 But I’ll just say that it has been the worst episode ever but finally my meds are adjusted and things seem to be on an even keel again. I still don’t feel that my meds are quite right, but I plan to study the meditation course for the prevention of depression relaspe so hopefully the meds will become less important in time.

The big news is that I have decided to go to America for a while this year. Normally this wouldn’t be news as I spend between 5 and 10 weeks a year there but I had actually been planning to *not* go over this year and have my parents come visit me instead. But my dad got sick (another reason I have been silent online is being stressed over him being in the hospital, etc.) and can’t do a long haul flight for a while and now my health problems are just getting to be more than t can handle. We’re going to have to look into getting me a carer but to do that I need to get disability benefits and that’s going to take several months so the temporary answer is that I will be going to the US to stay with my mom for two months to give t a break, then she will come over here for a few weeks to get some stuff organized so that we’re in a better position for the future.

SO: I’m going to be going to North Carolina from late May (ish) to the end of July (ish), with stops in Pittsburgh (and maybe Philly) and Tampa to see my dad (and maybe Disneyworld, that would rock!). I’m going to work on my knitting, practice spinning and maybe do some re-enacting. Also probably doing some scrapbooking and maybe a bit of quilting (Mom’s a big time quilt freak). And buying craft supplies. Oh yes, the best part! 🙂

All that comes after our trip to Paris next week though 🙂

I have more to talk about but I must rest my hands, my spinning class is tomorrow so I can’t afford to be crampy! 🙂 I’ll try to post again soon, really!

Early stuff: hats

Early loom knit hats

Three Basic Hats

This is probably boring to  most of you as it’s very basic hats like we all make when starting out with loom knitting.  The purple one on the right is what I made the very first night I loom knit, it took me about three hours while watching tv in a hotel room in Virginia.  Thats Red Heart Light & Lofty, which we’ll see more of soon as I’ve just done a more fun project with it.   THe gray hat is the Bernat soft boucle that I hate, again the basic hat form with a brim, blahblah.  This one’s for t, and has a scarf and fingerless mitts that go with it (but they’re not photographed yet).  The teal one I made because I wanted something without a brim for sleeping in — Ifind the brim annoying under my neck.  So I took some Moda Dea Metro (more of that to come, I like this one) and whipped up a hat quickly with a garter stitch border instead of a brim.  Perfect for keeping the draft off my scalp.

This photo was taken at the end of the day but as these hats are pretty boring to me I didn’t feel it was worth taking the shot again another time.  I’m a very lazy photographer, I am finding, which in some ways disturbs me as I’d love to have gorgeous, professional-looking shots like on other blogs, but just can’t manage to go into the other room, set up the lightbox and tripod and all the other faff that is involved.  I think I will have to do all of that for my beadwork though, we’ll see.

The baby mohawk hat

Baby Mohawk hat

(Sorry it’s a little blurry, I have a hard time holding steady..)

This has been all over, starting with a gorgeous Union flag mohawk hat in a punk knitting book and with variations all around the net. I just made a hat in 2×2 (k2p2) ribbing on the Knifty Knitter red round loom and then added the “hair” in the same way you’d add fringe to a scarf (lark’s head knots, I use a crochet hook to pull things through).

Yarn is Colinette Prism in Cherry for the body of the hat and Colinette Marshmallow in Lagoon for the mohawk.

Ponytail Hat

Ponytail hat

I call this the Ponytail Hat because, well it looks like the hat has a ponytail 🙂  Not suitable for wearing with actual ponytails, although I suppose you could modify it.  It is youth sized (my head is 20 inches in circumference without hair which is very small for an adult, more like pre-teen sizing).

This hat was made on the Knifty Knitter long yellow loom knittiing in the round.  I used a “ruffled” cast on (not that it looks very ruffled), then a K1P1 ribbing for six rows.  Next was ten rows of e-wrap and then I started the decreasing: first just the end pegs and then four pegs per row until I had eight pegs left.  I knitted the tube at eight pegs for about four inches, then decreased to six pegs for about five rows and then down to four pegs for the remainder of the ponytail.  Add fringe and voila!

This used most of one skein of Colinette Marshmallow in the Lagoon colourway.  To do an adult hat I’d go up to the green long loom and it would probably take one and half skeins. (It’s actually a little short for me as it is, if I were to do it again for myself I’d add 3-4 more rows of e-wrap but that would have put me over one skein and I didn’t have any more.)

The Awareness Scarf

Awareness Scarf

This is what I am calling the Awareness Scarf, cince it looks so much to me like an Awareness Ribbon.  It is a skinny keyhole scarf (one end goes through the other to hold it snug on the neck) made on the Knifty Knitter long looms.  This one is made in Colinette Marshmallow yarn in the colourway Jay and was made for a friend who is an ovarian cancer survivor (which had nothing to do with my choice of colour, she just happens to like blue 🙂 ).

I’m thinking about making several of these to sell on Etsy for about US$20 plus shipping, with $2 from each scarf given to a charity relating to one of my diseases.  I’d not really be charging anything for my time but I figure this is craft therapy time for me and the rest of the profit can go to more craft therapy for me.  I found making this was very soothing to my anxiety levels, better than meds 😛   I’d always use Colinette Marshmallow as long as I can still get it and then Colinette Point Five after that, they have a wide range of wonderful colours to choose from.

What do you think?  Is  $20 a reasonable price?  On the one hand it’s too little as it doesn’t pay me much at all for my time, on the other hand skinny scarves are very popular and going for much cheaper when mass produced so I think people will baulk at $20.  All I really care about is the opportunity to raise some money and awareness of some of my diseases, but getting to knit more and more is a very big plus 🙂

Comments very welcome…

Photographic Stop-Gap

Well, we stil haven’t completed a light tent to my satisfaction, but t just got a new camera (out of his ten year service bonus) and it does muuuch better with colour than mine. So it will do for now with yarn type things.

But I am really tired, so for now I shall just leave you with this pic of a work in progres that was on my loom earlier today (now finished for Thing-a-Day).

WIP

On the Loom: A child’s afghan

I’m still trying to sort out taking photos in poor light: as you can see I’m not there yet as this is pretty horrid.

A children's afghan, on the loom

This is a children’s afghan that I am making for Tricot du Coeur that will go to a camp for disabled children in North Carolina. I’m not sure if I am going to block it or not: blocking means less work to get it to fit the guideline sizes, but if the kid’s mom isn’t going to block it will the kid wind up disappointed when their afghan suddenly “shrinks” in the wash?

I’m using the Alternating Rib Stitch from ProvoCrafts and the yarn is Sirdar Stampata Chunky that I got on deep discount right before the holidays. It’s part wool, part synthetic and is washable up to 40 degrees C (about 100 F).

We’re going to go back to working on the photo corner tonight as this was with a moderate amount of light coming in through the window and that’s a luxury I don’t usually have. I’m feeling a little bit vindicated though that a couple of lamps and a sheet does NOT cut it, despite what t says 😛 I want a proper lightbox/light tent and that means more lamps and some kind of structure!

I’ve got Blisters on my Fingers!

OK, only hotspots.  But still, that hated Bernat Soft Boucle is such a pain to work with, the nubby bits just get caught on each other and so trying to do a K2P2 ribbing (which I am doing for t’s wristwarmers — sadly, he liked the first one so I am having to do another) is nightmarish.  Hoping to make it end quicker, I worked for 2-3 hrs on them yesterday and got *hotspots * (pre-blisters/swollen hot areas) on my thumb and forefinger from constantly yanking at the yarn to close the loops properly.  I think it might be easier with needles but the way that you do a purl on the loom involves lifting it off the loom, putting the new loop on and then tightening, so that’s a lot of manipulating the yarn.  Owwie!

Yesterday my Colinette order came through so I am taking a day off the blasted boucle and making a neck warmer to match my Ragdoll hat.  I’ve yet to figure out how much “fringe” I want, but I have plenty of yarn this time! 🙂

Pictures are a bit of a problem with the utter lack of light in London at the moment, but we’re building a light tent this weekend so hopefully I’ll be able to take decent photos whatever the weather.  Blistery fingers crossed!

“Sampler 6” Fingerless Gloves


I designed these gloves for two reasons: One, as a sampler of various stitch patterns that you can do on the round looms and Two, because I hadn’t seen any gloves done in the round, only flat panels that were seamed up.

I have a small hand and wrist, but I wanted to be able to wear these over my wrist braces. They stretch a fair bit. The pic below is NOT over braces. I also wanted the cuff to be loose so that it can go over a shirt sleeve or even the bottom of a coat sleeve as I hate how the wind can get in there! So this has a wider, gauntlet-like cuff then it narrows at the wrist. The whole pattern is a little roomy, if you want it tighter use the flat knit instead of the e-wrap.

Each set of stitches is done in 6 rows, hence the 6 in the name 🙂 The pattern goes as follows:

On the Knifty Knitter Round Blue Loom: 6 rows of garter stitch (e-wrap odd rows, purl even rows); 6 rows of e-wrap; 6 rows of K2P2 ribbing (knit two with the flat stitch, purl two, all the way around the loom), 6 rows of e-wrap, 6 rows of e-wrap as a flat panel (do not connect! turn around at the last peg and go back, this makes the hole for the thumb), 6 rows of garter stitch (as above), 6 rows of K2P2 ribbing (as above).

I’m sorry, but if you don’t know how to do any of the above steps, you need to look it up, I don’t have time to explain.

I used the horrible yarn that came with the Reader’s Digest loom set. Man, that stuff splits and frizzes badly. I probably won’t keep these gloves long as I don’t think the yarn will last!

Next I am going to make some fingerless gloves just in the K2P2 ribbing, which will be much tighter. I find K2P2 very tedious, but it does give a lot more “compression” than anything else I have tried thus far. I may do a sampler of various types of ribbing (K1P1, K3P1, etc.) to compare.

Sampler 6 Fingerless Gloves Modelled